Jacro 240
TECHNICAL SPECIFICATIONS:
1. Unit Power Supply :
- Engine Diesel Kubota 4 Cylinder V2203-E2B-EU-X3 Made in Original Japan.
- Power 40 Hp/ 3000 Rpm
- Hydraulic Power by Marzocchi ALP3AD60 + ALPPD2A16 Double ( for Rotary, and for up/down)
- Pressure 3000 Psi/210 bar
- Hydraulic Tank : 80 litre
- Diesel Fuel tank : 30 litre
2. Unit Control Device :
- Hand Control Valve 3Bank 1/2” Monoblock Branded Integral Italy IHV 20-3D/d5
( For Hydraulic Rotation, Hydraulic Winch, And Hydraulic Wire line ). - Hand Control Valve 3Bank 3/8” Mono block Branded Integral Italy IHV 18-3D/d5
( For Hydraulic Up Down , Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly ). - Relief Valve : For Adjustment pressure up/down Integral RV2-1/2” –F,
- Max Pressure 3000 Psi. Regulator Valve : For adjustment flow up/down Integral FRV2-1/2”
- Max flow 150 liter / minute, Brake Valve : For adjustment brake winch and wire line,
- Branded Integral Italy CBV2 ½” 0-3000 Psi, Pressure Gauge : By. Skon USA 0-250 Psi
3. Unit Power Device :
3.1 Rotary Head Motor Jacro 240 5(RH ½”) 4000 Series 109-1116 -006 By. Eaton USA
- Speed Power : 0-1200 Rpm, Power Pressure : 0-3000 Psi, Speed Rotary : 700-1500 Rpm
3.2 Up/Down Cylinder Hydraulic DFM 240 5CH Dia 63 x 73 x 40 x Stroke 1800mm
- Torsi Capacity : 915MM (66641 lb/in), Speed Power : 1000MM/10 Second, In / Out Port : 1/2” SAI O-ring
3.3 Wire Line Hydraulic Motor Jacro 240 5(RH 2/2) S Series 103-1032-010 By. Eaton USA
- Torsi Capacity : 452NMC (3961 lb/in), Speed Power : 0-250 Rpm, In/Out port : ½” SAI O-ring –
3.4 Winch Hydraulic Motor Jacro 240 5(RH 2/2) 2000 Series 104-1228-006 By. Eaton USA
- Torsi Capacity : 452NMC (3961 lb/in). Speed Power : 0-250 Rpm, In/Out port : ½” SAI O-ring
3.5 Cylinder Sleding Gearbox Jacro 240 (RH 2/2) Ø 40 x 50 x 25 Stroke 250 mm
- Torsi Capacity : 542 NMC (5675 lb/in), Speed Power : 0-500Meter/ 1.5 Second, In/Out port : 5/8” SAI O-ring
3.6 Hydraulic Clamp Chuck Assy Jacro 240 (RH 2/2) Ø 40 x 50 x 25 Stroke 70 mm
- Torsi Capacity : 300 NMC (5675 lb/in),
- Speed Power : 0-1 Meter/ 1.5 Second,
- In/Out port : ½” SAI O-ring
- Oil Cooler : 250 Ltr
- Water Injection Pump : Yanmar TF 85 + Sanchin 120
- Drill Pipe : 50 pipe (seemles) NQ3” / HQ3” @ 3 meter
- Drill Bite : Wingbite / PCD
- Water hose : hose polypipe
- Core barel : Assy NQ / HQ
OPERATIONAL RECOMMENDATIONS
Capacity Drilling Deep Down:
- NQ 250 Meters (Special Conditions)
- HQ 125 Meters (Special Conditions)
- PQ 60 Meters (Special Conditions)
DRILLING PERFORMANCE
Coal Project:
Open Hole: 50.00 m – 120.00 m /shift
Full Coring: 20.00 m – 90.000 m /shift