Jacro 300
TECHNICAL SPECIFICATIONS:
1. Unit Power Supply :
- Engine Diesel Kubota 4 Cylinder V2203-BBEC-SAE Made in Original Japan.
- Power 40 Hp/ 3000 Rpm
- Hydraulic Power by Pump Commercial Double P50-17979-FAA ( 50 Ltr/Minute And 22 Ltr/Minute ) Commercial – USA
- Pressure 3000 Psi/210 bar
- Hydraulic Tank : 120 litre
- Diesel Fuel tank : 30 litre
2. Unit Control Device :
- Hand Control Valve 3Bank 3/4” Branded Bucher Hidroirma Integral Italy HDS 20 ¾” 15
( For Hydraulic Rotation, Hydraulic Winch, And Hydraulic Wire line ). - Hand Control Valve 3Bank ½” Branded Bucher Hidroirma Integral Italy HDS 18-3D/d5
( For Hydraulic Up Down , Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly ). - Relief Valve : For Adjustment pressure up/down VickersC175 –F,
- Max Pressure 3000 Psi. Regulator Valve : For adjustment flow up/down Parker F-800 ½”
- Max flow 150 liter / minute, Brake Valve : For adjustment brake winch and wire line,
- Branded Vickers USA FPOD ½” 0-3000 Psi, Pressure Gauge : By.Vicker USA 0-450 Psi
3. Unit Power Device :
3.1 Rotary Head Motor Jacro 300 (RH ½”) Series Commercial Motor M75-17979
– Speed Power : 0-1000 Rpm (Continue), Power Pressure : 0-3000 Psi, Speed Rotary :
700-1500 Rpm, In/Out Put : 5/8” SAI 0-Ring
3.2 Up/Down Cylinder Hydraulic Jacro 300 CH Dia 65 x 40 x 75 x Stroke 2000mm
- Torsi Capacity : 512Nm (64711 lb/in), Speed Power : 1000MM/10 Second, In / Out Port : 1/2” SAI O-ring
3.3 Wire Line Hydraulic Motor Jacro 300 (RH 2/2) Series 104-1939-006 By. Eaton USA
- Torsi Capacity : 452NMC (3961 lb/in), Speed Power : 0-250 Rpm, In/Out port : ½” SAI O-ring
3.4 Winch Hydraulic Motor Jacro 300 (RH 2/2) Series 4000-109-1769-006 By. Eaton USA
- Torsi Capacity : 926NM/CM2 (10520 lb/in). Speed Power : 0-100 Rpm, In/Out port : ½” JIC-NPT
3.5 Cylinder Sleding Gearbox Jacro 300 (RH 2/2) Ø 40 x 50 x 25 Stroke 250 mm
- Torsi Capacity : 542 NM/Cm3 (8750 lb/in), Speed Power : 0-500 Rpm, In/Out port : 5/8” SAI O-ring
3.6 Hydraulic Clamp Chuck Assy Jacro 300 (RH 2/2) Ø 40 x 50 x 25 Stroke 70 mm By. Vikers
- USA (Size; NQ, HQ, PQ, & NW)
- Torsi Capacity : 542 NMC (8750 lb/in),
- Speed Power : 0-300 Rpm
- In/Out port : 3/8” SAI O-ring
3.7 Hydraulic Cylinder Lift Mash Jacro 300 ( RH 2/2 ) Ø 50 x 60 x 30 Stroke 650 By Vickers.
- Torsi Capacity : 477 NM ( 41200 lb/in ).
- Speed Power : 0–120 Rpm.
- In / Out Port : 1/2” SAI O-Ring
3.8 Cylinder Dump Mas Jacro 300 RH 1/2” Ø 63 x 73 x 40 x 300mm For Sock Mash
- Torsi Capacity : 117 NM ( 66641 lb/in )
- Speed Power : 0-500 Rpm/ 25 Second
- In/Out port : 1/2” SAI O-Ring
- Oil Cooler : 250 Ltr
- Water Injection Pump : Yanmar TF 85 + Sanchin 120
- Drill Pipe : 50 pipe (seemles) NQ3” / HQ3” @ 3 meter
- Drill Bite : Wingbite / PCD
- Water hose : hose polypipe
- Core barel : Assy NQ / HQ
OPERATIONAL RECOMMENDATIONS
Capacity Drilling Deep Down:
- NQ 300 Meters (Special Conditions)
- HQ 150 Meters (Special Conditions)
- PQ 75 Meters (Special Conditions)
DRILLING PERFORMANCE
Coal Project:
Open Hole: 50.00 m – 150.00 m /shift
Full Coring: 30.00 m – 100.00 m /shift