Jacro 400
TECHNICAL SPECIFICATIONS:
1. Unit Power Supply :
- Engine Diesel Kubota 4 Cylinder V3300-E2B-EU-Z4 Made in Original Japan.
- Power 68 Hp/ 2600 Rpm
- Hydraulic Power by Piston Pump ADU62+70122RAH Double ETN Vickers (For Rotary And For Up/Down )
- Pressure 3000 Psi/210 bar
- Hydraulic Tank : 120 litre
- Diesel Fuel tank : 30 litre
- UNIT CONTROL DEVICE
- – Hand Control Valve 3Bank 3/4” DTSC Suction IHV-03PC100-A111A8GKJI Integral by Italy (For Hydraulic Rotation, Hydraulic Winch Double, And Hydraulic Wire line Assy).
- – Hand Control Valve 5Bank 1/2” DTSC Mono IHV-05-P80-A11111A8GKJI Integral by Italy (For Hydraulic Up Down, Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly).
- – Relief Valve: For Adjustment pressure up/down Integral RV2-1/2”F Integral by Italy,
- – Max Pressure 3000 Psi. Regulator Valve: For adjustment flow up/down Integral WFC-800 (1/2”), Brake Valve : For adjustment brake/ Rem winch /Minute Integral By Italy, CBV2-½” &CBV3- ¾” , Pressure Gauge : By.Skon 0-250 Psi/Bar Umbrella Type
- UNIT POWER DEVICE
3.1 Rotary Head Motor Jacro 400(RH 5/8”) 6000 Series 112-1089-006 17T By. ETN USA
- -Speed Power: 0-1500 Rpm, Power Pressure: 0-5000 Psi, In/Out Put : ½” SAI 0-Ring
3.2 Up/Down Cylinder Hydraulic Jacro400 CH Weld Dia Bore ID.85 Rod.50 Stroke 1650mm
- Torsi Capacity: 915Nm (66641 lb/in), Speed Power: 1000MM/10 Second, In / Out Port: 1/2” SAI O-ring
3.3 Wire Line Hydraulic Motor Jacro400 (RH 2/2) 2000 Series 104-1028-006 By. Eaton ETN USA
- Torsi Capacity: 452NMC (3961 lb/in), Speed Power: 0-250 Rpm, In/Out port: ½” SAI O-ring
3.4 Winch Hydraulic Motor Jacro400Double RS80-2 Motor (RH 2/2) 4000 Series 109-1215-006 By. ETN USA
- Torsi Capacity: 915NMC (66641 lb/in). Speed Power: 0-700 Second Rpm, In/Out port: ½” SAI O-Ring
3.5 Cylinder SledingGearbox Jacro400 (RH 2/2) Weld Ø Bore ID.40 Rod.25 Stroke 250mm
- Torsi Capacity: 272 NM (2219 lb/in), Speed Power: 0-1 Meter/2 Second, In/Out port: 3/8” SAI O-ring
3.6 Hydraulic Clamp Chuck AssyJacro400 (RH 2/2) Weld Ø Bore ID.40 Rod.25 Stroke 70mm
- Torsi Capacity: 727 NM (5675 lb/in),
- Speed Power: 0-1 Meter/1.5 Second
- In/Out port: 1/2” SAI O-ring
3.7 Hydraulic Cylinder Lift Mash Jacro 400 (RH ½”) Weld Ø Bore ID.63 Rod.40 Stroke 1500mm
- Torsi Capacity: 117 NM ( 6664lb/in )
- Speed Power: 0–500 Second
- In/Out port: 3/8” SAI O-ring
3.8Hydraulic Cylinder Jack Mash Jacro 400 Weld Ø Bore ID.63 Rod.40 Stroke 1500 mm
- Torsi Capacity: 117 NM (6664 lb/in)
- Speed Power: 0-500 Second
- In/Out port: 3/8” SAI O-Ring
- Oil Cooler: 350 Ltr
- Water Injection Pump: FMC Pump
- Drill Pipe: NQ3=400 Mtr, HQ3=300Mtr, & PQ=150 Mtr @ 3 meter
- Drill Bite: Wingbite / PCD
- Water hose: hose polypipe
- Core barel: Assy NQ / HQ
OPERATIONAL RECOMMENDATIONS
Capacity Drilling Deep Down:
- NQ 400 Meters (Special Conditions)
- HQ 300 Meters (Special Conditions)
- PQ 100 Meters (Special Conditions)