Jacro DBM800
TECHNICAL SPECIFICATIONS:
- POWER SUPPLY UNIT
- Vertical Diesel Engine 6 Cylinder 120 Kw , 160 Hp (From User)
- Hydraulic Power Axial Piston ERR-100 Sauer Danfoss
- Hydraulic Pump, Gear Pump P350 80cc Comercial Parker
- Pressure 290 bar
- Hydraulic Tank: 450litre
- Diesel Fuel Tank: 65 litre
- UNIT CONTROL DEVICE
- SD18/3 Sectional Directional Control Valves Walvoil Type Port 1 Inch For Controlling Hydraulic Rotary Drill Head, Hydraulic Winch and Hydraulic Wireline.
- HDS 30/7 Sectional Directional Control Valves Bucher Type Port 3/4 Inch For Controlling Hydraulic Pull Up-Down, Sliding Gearbox, Mast Dump, Lift Mast, Break Out and Foot Clamp Hydraulic.
- Relief Valves For Adjustment Pressure Pull Up-Down.
- Flow Control Valves For Adjustment Flow Up-Down.
- Double Overcentre Valves For Adjustment Brake Hydraulic Winch and Hydraulic Wireline
- UNIT POWER DEVICE
3.1. Top Drive Gearbox Chain 4 susun Ratio 1:2 With Mechanical Transmission Funk Gear 4 Speed and Water Swivel 1 1/4” NPT Port.
- Speed Power: Axial Piston Motor (Hydraulic Motor Max. Displacement, Prime Mover at 2,800 Rpm – Max. 293 Bar)
3.2. Up/Down Cylinder Hydraulic DBM 800 CH Weld Dia Bore ID.85 Rod.50 Stroke 1650mm
- Torsi Capacity:Pull Down Force 8,100 Kg @200 Bar ,Pull Up Force 16,000 Kg @200 Bar Speed Power: 1000MM/10 Second, In / Out Port: 1/2” SAI O-ring
3.3. Wire Line Hydraulic Motor Rotation Motor 4000 Series Eaton Type Disc Valve
- Torsi Capacity: 452NMC (3961 lb/in), Speed Power: 0-250 Rpm, In/Out port: ½” SAI O-ring
3.4. Winch Hydraulic Motor Rotation axial Piston
- Torsi Capacity: 20.000Kg. Ratio 12:1
3.5. Cylinder SledingGearbox
3.6. Hydraulic Clamp Chuck Hydraulic Operated Indigenous Rod Clamp with Break Out. NQ, HQ & PQ size jaws with replaceable hartong dick inserts
3.7. Hydraulic Cylinder Lift Mash 400 (RH ½”) Weld Ø Bore ID.63 Rod.40 Stroke 1500mm
- Torsi Capacity: 117 NM ( 6664lb/in )
- Speed Power: 0–500 Second
- In/Out port: 3/8” SAI O-ring
3.8. Hydraulic Cylinder Jack Mash Jacro 400 Weld Ø Bore ID.63 Rod.40 Stroke 1500 mm
- – Torsi Capacity: 117 NM (6664 lb/in)
- – In/Out port: 3/8” SAI O-Ring
- – Oil Cooler: 350 Ltr
- – Water Injection Pump: Mud Pump
- – Drill Pipe: NQ3=700 Mtr, HQ3=500Mtr, & PQ=150 Mtr @ 3 meter
- – Drill Bite: Wingbite / PCD
- – Water hose: hose polypipe
- – Core barel: Assy NQ / HQ
OPERATIONAL RECOMMENDATIONS
Capacity Drilling Deep Down:
- NQ 800 Meters (Special Conditions)
- HQ 600 Meters (Special Conditions)
- PQ 300 Meters (Special Conditions)